download datavideo se-3000-8 product manual - Go Electronic

The bottom of the screen now shows the menu options for MultiViewer and the first option is also calledMultiViewer. Tapping on this option in the bottom left hand corner displays the list of 5 layout options.Modifying the chosen MultiViewer LayoutIt is advisable to have the Multi Image Preview displayed on the Preview monitor(s) first so that you can seethe effect of the following settings as you change them.Changing Main Screens 1~4To make things easier to understand we shall use theDual Mode 2 MultiViewer option as an example. Themethod involved in changing Main Screens 1~4 here isthe same for the other MultiViewer set ups.When you look at the initial layout of Dual Mode 2 (above) you can see that the top two images in bothscreens are; Preview, Program for the Multi-1 Output, and Still 1, Still 2 for the Multi-2 Output. When lookingat the MultiViewer options below you will see 4 user options along the bottom of the Touch Screen. Theseare Main 1 Src, Main 2 Src, Main 3 Src and Main 4 Src and immediately below each will be their currentsetting.Touch the Menu Panel below the Main 1 Src option and a list of options becomes available. So here youhave the ability to swap the larger MultiViewer screens around or use other options such as PGM DSK1.Play around with these settings and see which combination meets your production needs best.18