TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-28. COMPOSITE STOPLIGHT-TAILLIGHT MAINTENANCE (continued).b. LAMP/LED INSTALLATION1. Install two LEDs (10 and 11) in sockets (9) by snapping into place by hand.2. Install two lamps (8) in sockets (9) by pushing in and turning clockwise.3. Install two lamps (5 and 6) in sockets (7) by pushing in and turning clockwise.4. If removed, install new preformed packing (4) in lens (2).5. Install lens (2) on body (3) and tighten six captive screws (1).c. COMPOSITE STOPLIGHT-TAILLIGHT REMOVALNOTEIf marker bands are missing or illegible, tag wires for installation purposes (para 4-21).1. Remove four composite stoplight-taillight connectors (12) and chassis wiring harness connectors (13) from clip(14) and disconnect connectors (12 and 13).2. Remove grommet (15) from hole (16) in frame.3. Pull four wires (17) of composite stoplight-taillight (18) through hole (16) in frame.4. Remove two capscrews (19), lockwashers (20), and washers (21) and composite stoplight-taillight (18) frombracket (22). Discard lockwashers and washers.5. If bracket (22) is damaged, remove two self-locking nuts (23) and capscrews (24) and bracket (22) from frame.Discard self-locking nuts.4-41