TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-33. HANDBRAKE LEVER AND LINKAGE REPLACEMENT (continued).5. Remove two self-locking nuts (12), capscrews(13), and spacers (14), handbrake lever (15),and two washers (16) from frame (11). Discardself-locking nuts.6. Disconnect cable assembly (3) from handbrakelever (15).7. Repeat steps 1 through 6 for removal of otherhandbrake lever and linkage.b. CLEANING AND INSPECTIONWARNINGDrycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles and gloves,and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOTbreathe vapors. DO NOT use near open flame or excessive heat.1. Clean all removed components with drycleaning solvent and rag and allow to dry.2. Inspect handbrake lever for bends, breaks, corrosion, and freedom of action. Replace handbrake lever ifdamaged.3. Inspect cable assembly for frays, cracks, distortion, corrosion, and freedom of movement in conduit. Replacecable assembly if damaged.4. Inspect all mounting hardware for damage. Replace if damaged.4-51