TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-28.1. BLACKOUT STOPLIGHT MAINTENANCE (M101A1 and M116A1) (CONTINUED).d. CLEANING AND INSPECTION438-011WARNINGDrycleaning solvent P-D-680 is toxic and flammable. Always wear protectivegoggles and gloves, and use only in a well-ventilated area. Avoid contactwith skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use nearopen flame or excessive heat.1. Use drycleaning solvent to clean lens, lens retainer, and outside of housing. Dry thoroughly.2. Use detergent and water to clean inside of housing. Dry thoroughly.3. Use abrasive cloth to remove corrosion.4. Touch up paint (refer to TM 43-0139).5. Inspect lens retainer for signs of moisture leakage, cracks, and warpage. Inspect lens for cracks orbreaks. Replace lens retainer if lens retainer or lens is damaged.6. Inspect housing for cracks and dents. Inspect connector for being electrically and mechanically good.Replace housing if damged.7. Inspect grommets for damage and deterioration. Replace grommets if damaged.8. Inspect socket assembly for good electrical and mechanical connections; cracked or deterioratedinsulation; broken wires; and corroded lug, terminal, or socket. Replace socket assembly if damaged.Change 2 4-42.3