TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-37. WHEEL CYLINDER REPLACEMENT.This Task Covers:a. Removal b. Cleaning and Inspectionc. InstallationInitial Setup:Tools/Test Equipment: • Solvent, drycleaning (Item 15, Appendix F)• General mechanic’s tool kit (Item 1, Appendix B) • Lockwasher, MS35335-34• Common No. 1 tool set (Item 2, Appendix B)Equipment Conditions:Materials/Parts:· • Hub and brakedrum removed (para 4-43).• Rag (Item 13, Appendix F)a. REMOVALNOTE• Use a suitable container to catch any draining brake fluid. Make sure all spills are cleaned up.• If removing or replacing wheel cylinder, do steps 1 and 2 only. If removing or replacing bleeder valveonly, do step 3 only.1. Disconnect hydraulic brake tube assembly (1) at inlet to wheel cylinder (2).2. Remove bolt (3), lockwasher (4), wheel cylinder (2), and link (5) from backing plate (6). Discard lockwasher.3. Remove bleeder valve (7) from wheel cylinder (2).4-61