TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&PB-3.EXPLANATION OF COLUMNS IN SECTION II, MAINTENANCE ALLOCATIONCHART FOR M101 AND M116 SERIES TRAILERS (CONTINUED).any necessary disassembly/assembly time), troubleshooting/fault location time, and quality assurance/quality control time in addition to the time required to perform the specific tasks identified for the maintenancefunctions authorized in the MAC. The symbol designations for the various maintenance levels areas follows:Field:C . . . . . . . . . . . . . . . . . Operator/CrewO . . . . . . . . . . . . . . . . . UnitF. . . . . . . . . . . . . . . . . . Direct SupportSustainment:H . . . . . . . . . . . . . . . . . General SupportD . . . . . . . . . . . . . . . . . Depote. (5) Tools and Equipment Reference Code. Column 5 specifies, by code, those common tool sets (notindividual tools), common TMDE, special tools, special TMDE, and special support equipment required toperform the designated maintenance function. Codes are keyed to tools and test equipment listed in SectionIll.f. (6) Remarks. When applicable, this column contains a letter code, in alphabetical order, which is keyed toremarks contained in Section IV. If there is nothing in the Remarks column, there is no Section IV.B-4.EXPLANATION OF COLUMNS IN SECTION III, TOOL AND TEST EQUIPMENTREQUIREMENTS.a. Column 1, Tool or Test Equipment Reference Code. This code correlates with the code used in SectionII, Column 5.b. Column 2, Maintenance Level. The symbol designation shown indicates the lowest level of maintenanceauthorized to use the tool or test equipment.c. Column 3, Nomenclature. This is the name or identification of the tool or test equipment.d. Column 4, National Stock Number. This is the national stock number of the tool or test equipment.e. Column 5, Tool Number. This is the manufacturer’s part number.B-5.EXPLANATION OF COLUMNS IN SECTION IV, REMARKS.a. Column 1, Remarks Code. This column contains the code letter recorded in Column 6 of Section II, theMAC.b. Column 2, Remarks. This column provides information pertinent to the maintenance function being performedas indicated in Section II, the MAC.Change 2 B-3