TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-35.1. SERVICE BRAKE MAINTENANCE (M101A1 AND M116A1) (CONTINUED).b. DISASSEMBLY1. Remove two spring clips (7) and springs (8).2. Remove cap (9), nut (10), washer (11), pin (12), and brake lever (2).3. Remove clip (13), washer (14), and brakeshoe (15). Discard clip.4. Remove clip (16) and strut (17). Discard clip.5. Remove clip (18), washer (19), and brakeshoe (20). Discard clip.6. Remove four capscrews (21) and brake guide (22).7. Remove two brake guide washers (23).438-002c. CLEANING AND INSPECTIONWARNINGDrycleaning solvent P-D-680 is toxic and flammable. Always wear protective gogglesand gloves, and use only in a well-ventilated area. Avoid contact with skin,eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame orexcessive heat.1. Clean all removed components with drycleaning solvent and rag and allow to dry.2. Inspect backing plate for cracks, breaks, corrosion, or other damage. Replace backing plate if damaged.4-60.2 Change 2