TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-35. SERVICE BRAKE MAINTENANCE (CONTINUED).3. Install two brakeshoes (14 and 15), pins (22), and springs (21) on backing plate (6). Install two retainers(20), spring (24), and strut (23) on backing plate (6).4. Turn in adjusting screw (19) fully. Install adjusting screw (19) and spring (18) between two brakeshoes(14 and 15).5. Install plate (17) on anchor pin (16).6. Install two springs (13) on anchor pin (16)and brakeshoes (14 and 15).e. INSTALLATION1. Install backing plate (6) and service brakeassembly on axle (12) with five capscrews(11), new lockwashers (10), and nuts (9).2. Connect hydraulic tube assembly (7) towheel cylinder (8) at backing plate (6).3. Feed handbrake cable assembly (3)through backing plate (6) and position atlever (4). Make sure lock tangs (5) arespread and hold handbrake cable assembly(3) securely in backing plate (6).4. Pull spring (1) away from swaged sleeve(2), and hook swaged sleeve (1) to lever(4).FOLLOW-ON TASKS:• Install hub and brakedrum (para 4-43).• Install wheel and tire assembly (para 4-44).• Bleed hydraulic brake system (para 4-41).• Adjust service brakes (para 4-36).• Adjust handbrakes (para 4-34).4-59