TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-28.2. STOPLIGHT MAINTENANCE (M101A1 AND M116A1) (CONTINUED).c. STOPLIGHT DISASSEMBLY1. Push back three shells (19) and remove slotted washers (20) and shells off wire.NOTEScrews (1) are held in lens retainer (2) by retainers (3).2. Loosen six screws (1), remove lens retainer (2), and preformed packing (4). Discard preformed packing.3. Remove lamp (5) and two lamps (6) from sockets (7) by pushing in and turning counterclockwise.4. Remove two screws (21) and lockwashers (22). Discard lockwashers.5. Remove three screws (23) and pull socket and wiring assembly (24), retaining plate (25), and grommet(26) out of housing (27).438-014d. CLEANING AND INSPECTIONWARNINGDrycleaning solvent P-D-680 is toxic and flammable. Always wear protectivegoggles and gloves, and use only in a well-ventilated area. Avoid contactwith skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use nearopen flame or excessive heat.1. Use drycleaning solvent to clean lens, lens retainer, and outside of housing. Dry thoroughly.2. Use detergent and water to clean inside of housing. Dry thoroughly.3. Use abrasive cloth to remove corrosion from lens retainer and housing.4-42.8 Change 2