TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-36.1 SERVICE BRAKE ADJUSTMENT (M101A1 AND M116A1).This Task Covers:AdjustmentInitial Setup:Tools/Test Equipment:• General mechanic’s tool kit (Item 1, Appendix B)• Common No. 1 tool set (Item 2, Appendix B)ADJUSTMENTNOTEThe procedure for adjusting the service brake is the same for the left side and theright side.1. Apply handbrakes (para 2-10). Chock wheel and tire assembly (1) opposite side of service brakebeing adjusted.2. Raise axle (2) on side being adjusted until wheel and tire assembly (1) is off the ground.3. Release handbrake on side being adjusted (para 2-10).4. While turning wheel and tire assembly (1), turn cam stud (3) until brake drags. Turn cam stud inopposite direction just enough to remove drag.5. Repeat step 4 for other cam stud (4).6. Remove button plug (5).7. Loosen nut (6) and turn eccentric pin (7) until it binds. Tighten nut.8. Install button plug (5).9. Lower axle (2). Apply handbrake on adjusted side (para 2-10).438-003FOLLOW-ON TASKS:• Adjust handbrakes (para 4-34).4-60.6 Change 2.