TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-43.1. HUB, BRAKEDRUM, AND WHEEL BEARINGS MAINTENANCE (M101A1 ANDM116A1) (CONTINUED).3. Wipe spindle clean with drycleaning solvent and rag. Inspect spindle for cracks, bends, and scoredor discolored bearing surfaces. If threads are damaged, restore. Notify Direct Support maintenance ifspindle is damaged beyond repair.4. Inspect wheel hub for cracks, breaks, and burrs. Remove burrs with abrasive cloth. Replace wheelhub if damaged.5. Inspect brakedrum for cracks, scoring, pitting, and grooves. Notify Direct Support maintenance ifbrakedrum is damaged.6. Inspect all remaining components for damage. Replace if damaged.d. ASSEMBLYNOTE• Use left shoulder bolts on left wheel hub and right shoulder bolts on right wheelhub.• Align flat on shoulder bolt with flat on wheel hub flange.1. If removed, drive five shoulder bolts (18) into wheel hub (16).2. Coat mating surface (19) of wheel hub (16) and mating surface (20) of brakedrum (17) with clean oil.3. Align countersunk holes (21) in brakedrum (17) with tapped holes (15) in wheel hub (16).NOTEDo not tighten screws at this time.4. Install three screws (13) loosely.5. Using soft-face mallet, tap brakedrum (17) against wheel hub (16).6. Tighten three screws (13).438-007Change 2 4-90.3