TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P5-1. AXLE REPLACEMENT (continued).2. Place floor jack under midpoint of axle (1) to provide a balanced support.3. At each end of axle (1), remove four self-locking nuts (2) and washers (3), two U-bolts (4), and bumper (5) fromspring assembly (6) and spring plate (7). Discard self-locking nuts.4. Remove axle (1) from under trailer and from floor jack.b. INSTALLATION1. Place midpoint of axle (1) on floor jack and position axle (1) under trailer.2. Raise axle (1) until it contacts underside of spring assembly (6). At each end of axle (1), engage spring assemblycenter bolt head (8) with hole in pad on bumper (5).3. Install bumper (5) on each spring assembly (6).4. At each end of axle (1), install two U-bolts (4) into grooves of bumper (5) and through holes in spring plate (7).5. At each end of axle (1), install four washers (3) and new self-locking nuts (2) on two U-bolts (4).6. Remove floor jack from under axle (1).FOLLOW-ON TASKS:• Install service brakes (para 4-34).• Install hydraulic brake lines on axle (para 4-39).• Install shock absorbers (para 4-54).5-2