TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-37. WHEEL CYLINDER REPLACEMENT (continued).b. CLEANING AND INSPECTIONWARNINGDrycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles and gloves,and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOTbreathe vapors. DO NOT use near open flame or excessive heat.1. Clean all removed components, except wheel cylinder, with drycleaning solvent and rag and allow to dry. Wipe wheelcylinder with a clean rag.2. Inspect components for cracks, breaks, corrosion, or damaged threads. Replace if damaged.c. INSTALLATION1. If removed, install bleeder valve (7) on wheel cylinder (2).CAUTIONMake sure boot of wheel cylinder is dry before installing wheel cylinder. Failure to follow thiscaution may cause brake fluid to damage brakeshoe linings.2. Assemble wheel cylinder (2) and link (5) at backing plate (6), with link engaged in primary brakeshoe (8). Install newlockwasher (4) and bolt (3) on wheel cylinder (2). Torque bolt between 130 and 280 lb-in (15-26 Nom).3. Connect hydraulic brake tube assembly (1) to inlet of wheel cylinder (2).FOLLOW-ON TASKS:• Install hub and brakedrum (para 4-43).• Install wheel and tire assembly (para 4-44).• Bleed hydraulic brake system (para 4-41).• Adjust service brake (para 4-36).• Adjust handbrakes (para 4-34).4-62