TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&PAPPENDIX ILUBRICATION INSTRUCTIONSParagraphPageNumber Paragraph Title NumberI-1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-1I-2 Specific Lubrication Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-1I-3 Lubrication Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2I-1.GENERAL.NOTEThese instructions are MANDATORY.a. The M101 and M116 Series trailers must receive lubrication with approved lubricants at recommendedintervals in order to be mission-ready at all times.b. The KEY (p. I-4) lists lubricants to be used in all temperature ranges and shows the intervals.c. The Lubrication Chart (p. I-3) shows lubrication points, items to be lubricated, required lubricants, and recommendedintervals for lubrication. Any special lubricating instructions for specific components are containedin NOTES (p. I-4).d. Recommended intervals are based on normal conditions of operation; under extreme conditions, lubricantsshould always be changed more frequently. When in doubt, notify your supervisor.I-2.SPECIFIC LUBRICATION INSTRUCTIONS.a. Keep all lubricants in a closed container and store in a clean, dry place away from extreme heat. Keep containercovers clean and do not allow dust, dirt, or other foreign material to mix with lubricants. Keep alllubrication equipment clean and ready for use.b. Maintain a record of lubrication performed and report any problems noted during lubrication. Refer to DAPam 750-8 for maintenance forms and procedures for recording and reporting any findings.WARNINGWipe excess lubricant from the area of brakeshoe linings to prevent greasefrom soaking the linings. If brakeshoe linings become soaked, have Unitmaintenance replace them. Failure to follow this warning may cause brakesto malfunction, resulting in serious injury or death to personnel.c. Keep all external parts not requiring lubrication free of lubricants. After lubrication, wipe off excess oil orgrease to prevent accumulation of foreign matter.d. After parts are cleaned, rinse and dry them thoroughly. Apply a light grade of oil to all polished metal surfacesto prevent rusting.Change 2 I-1