TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-43.1. HUB, BRAKEDRUM, AND WHEEL BEARINGS MAINTENANCE (M101A1 ANDM116A1) (CONTINUED).7. Pack inner bearing hub cone and roller(12) with grease and install.8. Install new seal (11) and retaining ring(10).438-005e. INSTALLATION1. Lightly coat spindle with grease and install wheel hub and brakedrum assembly (9).2. Pack outer bearing hub cone and roller (8) with grease and install on spindle.3. Install adjusting nut (7), key washer (6), and outer bearing sleeve nut (5) on wheel hub and brakedrumassembly (9).4. Install new paper gasket (4), access cover (3), six new lockwashers (2), and cap screws (1) on wheelhub and brakedrum assembly (9).438-004438-0864-90.4 Change 2