13.07.2015 Views

TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

TM 9-<strong>2330</strong>-<strong>202</strong>-14&P2-13. COUPLING TRAILER TO TOWING VEHICLE (C<strong>ON</strong>TINUED).WARNING• All personnel must stand clear of towing vehicle and trailer during couplingoperation. Failure to follow this warning may result in serious injury or death topersonnel.• DO NOT move the trailer laterally (push/pull) using the landing leg/caster as athird wheel or trailer dolly. Mounting bracket or landing leg/cast or failure maycause trailer damage or injury to personnel.• Use ground guides and back prime mover to the trailer lunette, NOT vice versa.Failure to follow this warning may result in injury or death to personnel.• DO NOT use landing leg/caster as a third wheel to pivot/turn trailer around toface the prime mover. Remove the load from the trailer if it must be turnedaround. Failure to follow this warning may result in serious injury to personnelor damage to equipment.e. Back towing vehicle in front of drawbar coupler (8).WARNING• Drawbar is heavy - up to 280 lb (127 kg) loaded tongue weight. Use front support(landing) leg crank to raise and lower trailer drawbar. If support leg assembly isinoperative, use suitable lifting deice to lift the drawbar. If a suitable liftingdevice is not available, remove load from trailer and use four or more personsto lift drawbar. Failure to follow this warning may result in serious injury to personnelor damage to equipment.• Keep hands away from lunette ring during coupling operations. Use the landingleg crank to lower or raise lunette. Realign prime mover tow pintle with lunetteas necessary. Failure to follow this warning may result in injury to personnel.f. Use handcrank to adjust height of drawbar coupler (8). Place drawbar coupler (8) in pintle hook (6).g. Close pintle hook (6). Check to see that locking latch (7) is locked by pulling up on pintle hook (6). Pintlehook (6) should not come up. Install safety pin (5) in pintle hook (6).h. Cross two safety chains (9) under drawbar coupler (8) and hook to two towing vehicle eyebolts (10).Change 2 2-17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!