TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-40. HYDRAULIC BRAKE LINES REPLACEMENT (continued).b. FRONT TUBE ASSEMBLY INSTALLATION1. Install five loop clamps (2) on front tube assembly (4).2. Position front tube assembly (4) along curb-side drawbar (3) and connect to coupling (7).3. Connect front tube assembly (4) to connector (5) at master cylinder (6).4. Install five loop clamps (2) on curb-side drawbar (3) with five screws (1).c. REAR TUBE ASSEMBLY REMOVAL1. Remove two screws (8) from two loop clamps (9) along curb-side frame (10).2. Disconnect rear tube assembly (11) from coupling (7).3. On the M101A2 and M116A2, remove self-locking nut (12) and screw (13) from loop clamp (14) along crossmember.Disconnect rear tube assembly (11 ) from hose assembly (15) and remove. Discard self-locking nut.4. On the M101A3, M116A2E1, and M116A3, remove rear tube assembly (11) from hose assembly (15) at retaining ring(16).5.On the M101A2 and M 116A2, remove two loop clamps (9) and loop clamp (14) from rear tube assembly (11).4-77