TM9-2330-202-14&P - JATONKAM35s HOME ON THE WEB

TM 9-2330-202-14&P4-35. SERVICE BRAKE MAINTENANCE (continued).b. DISASSEMBLY1. Remove two springs (13) from two brakeshoes (14 and 15) and anchor pin (16). Remove plate (17) from anchor pin(16).2. Remove spring (18) and adjusting screw (19) from two brakeshoes (14 and 15).3. Remove two retainers (20), springs (21), and pins (22) from two brakeshoes (14 and 15) and backing plate (6).4. Remove two brakeshoes (14 and 15), strut (23), and spring (24) from backing plate (6).5. Remove clamp (25), spring tension washer (26), and lever (4) from brakeshoe (15). Discard clamp.6. Remove bolt (27), lockwasher (28), and wheel cylinder (29) from backing plate (6). Discard lockwasher.c. CLEANING AND INSPECTIONWARNINGDrycleaning solvent P-D-680 is toxic and flammable. Always wear protective gogglesand gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, andclothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.1. Clean all removed components with drycleaningsolvent and rag and allow to dry.4-57