G1000 Reference Guide - SkyHoppers

SECTION 7 – NAVIGATIONSelect an Airport from the Active Flight Plan1) With the Airport Information Page displayed,press the FMS Knob to activate the cursor.2) Turn the small FMS Knob to the left to displaya list of flight plan airports as shown in Figure7-52.Figure 7-52 Flight Plan Airport List3) Turn the large FMS Knob to select the desiredairport.4) Press the ENT Key.4) Turn the large FMS Knob to select the desiredairport.5) Press the ENT Key.Select a Recently Entered Airport Identifier1) With the Airport Information Page displayed,press the FMS Knob to activate the cursor.2) Turn the small FMS Knob to the left. Initially, aflight plan waypoint list is displayed as in Figure7-52. The list is populated only when navigatinga flight plan.3) Turn the small FMS Knob to the right to displaythe ‘RECENT’ airports as shown in Figure 7-54.Select a Nearest Airport1) With the Airport Information Page displayed,press the FMS Knob to activate the cursor.2) Turn the small FMS Knob to the left. Initially, aflight plan airport list is displayed as in Figure 7-52. The list is populated only when navigatinga flight plan.Figure 7-53 Nearest Airport List3) Turn the small FMS Knob to the right to displaythe ‘NRST’ airports to the aircraft’s currentposition as shown in Figure 7-53.Figure 7-54 Recently Entered Airports List4) Turn the large FMS Knob to select the desiredairport.5) Press the ENT Key.Select an Airport by Facility Name or CityLocation1) With the Airport Information Page displayed,press the FMS Knob to activate the cursor.2) Turn the large FMS Knob to the right to select thefacility name or location (city) field.3) Enter the desired facility name or city.5) Press the ENT Key. If there are duplicate namesin the database, a list is displayed from which tochoose the desired location.6) To remove the flashing cursor, press the FMSKnob.7-22Garmin G1000 Cockpit Reference Guide for the Cessna Nav III190-00384-07 Rev. A