G1000 Reference Guide - SkyHoppers

SECTION 8 – FLIGHT PLANNING8.18 DELETE A FLIGHT PLAN1) From the Flight Plan Catalog Page, press the FMSKnob to activate the cursor.2) Turn the large FMS Knob to highlight the flightplan to be deleted.3) Press the DELETE Softkey.4) A ‘Delete flight plan #?’ confirmation window isdisplayed. With ‘OK’ highlighted, press the ENTKey to delete the flight plan. To cancel, turn thelarge FMS Knob to highlight ‘CANCEL’ and pressthe ENT Key.8.20 TRIP PLANNING1) Turn the large FMS Knob to select the ‘AUX’ pagegroup.2) Turn the small FMS Knob to select the firstrectangular page icon.3) The current page mode is displayed at the top ofthe page: ‘AUTOMATIC’ or ‘MANUAL’. To changethe page mode, press the AUTO or MANUALSoftkey.Starting WPTEnding WPT8.19 GRAPHICAL FLIGHT PLAN CREATION1) Press the FPL Key to display the Active Flight PlanPage.2) Press the Joystick to activate the map pointer. Usethe Joystick to move the pointer to the desiredpoint on the map to be inserted as a waypointin the flight plan.3) Press the LD WPT Softkey. The selected waypointwill be inserted at the end of the flight plan.The default user waypoint naming is USR000,USR001, USR002 and so on.4) If the selected waypoint is to be placed elsewherein the flight plan, press the FMS Knob to activatethe cursor. Waypoints are inserted ABOVE thecursor.5) After placing the cursor at the desired point inthe list of waypoints, press the LD WPT Softkey.6) To change the user waypoint name, follow theprocedure for modifying a user waypoint.Figure 8-21 Trip Planning Page4) For Direct-to planning, press the WPTS Softkeyand verify that the starting waypoint fieldindicates ‘P.POS’ (present position). If necessary,press the MENU Key and select ‘Set WPT toPresent Position’ to display ‘P.POS’. Press the ENTKey and the flashing cursor moves to the endingwaypoint field. Turn the FMS Knobs to enter theidentifier of the ending waypoint and press theENT Key to accept the waypoint. OR,8-8Garmin G1000 Cockpit Reference Guide for the Cessna Nav III190-00384-07 Rev. A