You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 1SYSTEM OVERVIEWside of the display, indicating the availability ofadditional items within the selected category.Press the small FMS Knob to activate the cursorand turn the large FMS Knob to scroll through thelist.14 MENU Key – Displays a context-sensitive listof options. This list allows the user to accessadditional features, or to make setting changesthat relate to certain pages.15 PROC Key – Selects approaches, departures andarrivals from the flight plan. If a flight plan isused, available procedures for the departure and/or arrival airport are automatically suggested. Ifa flight plan is not used, the desired airport andthe desired procedure may be selected. This keyselects IFR departure procedures (DPs), arrivalprocedures (STARs) and approaches (IAPs) fromthe database and loads them into the active flightplan.16 ENT Key – Accepts a menu selection or dataentry. This key is used to approve an operationor complete data entry. It is also used to confirmselections and information entries.17 Dual ALT Knob – Sets the selected altitude inthe box located above the Altimeter. The largeknob selects the thousands, while the small knobselects the hundreds. Altitude Select is used bythe Automatic Flight Control System in certainmodes, in addition to the standard <strong>G1000</strong> AltitudeAlerter function.18 AP Key – (182 & 206 only) Engages/disengagesthe Autopilot and Flight Director. Pressing theAP Key activates the Flight Director and engagesthe Autopilot in the default pitch axis and roll axismodes. Pressing the AP Key again disengages theautopilot and deactivates the Flight Director.19 HDG Key – (182 & 206 only) Selects/deselectsthe Heading Select Mode.20 NAV Key – (182 & 206 only) Selects/deselects theNavigation Mode.21 APR Key – (182 & 206 only) Selects/deselects theApproach Mode.22 VS Key – (182 & 206 only) Selects/deselects theVertical Speed Mode.23 FLC Key – (182 & 206 only) Selects/deselects theFlight Level Change Mode.24 FD Key – (182 & 206 only) Activates/deactivatesthe Flight Director only. Pressing the FD Keyturns on the Flight Director in the default pitchaxis and roll axis modes. Pressing the FD Keyagain deactivates the Flight Director and removesthe command bars, unless the Autopilot isengaged. If the Autopilot is engaged, the FD Keyis disabled.25 ALT Key – (182 & 206 only) Selects/deselects theAltitude Hold Mode.26 VNV Key – (182 & 206 only) Selects/deselectsVertical Navigation Mode.27 BC Key – (182 & 206 only) Selects/deselects BackCourse Mode.28 29 NOSE UP/NOSE DN Keys – (182 & 206only) Controls the active pitch reference forthe Pitch Hold, Vertical Speed, and FlightLevel Change Modes.1-4Garmin <strong>G1000</strong> Cockpit <strong>Reference</strong> <strong>Guide</strong> for the Cessna Nav III190-00384-07 Rev. A
Change language