G1000 Reference Guide - SkyHoppers

SECTION 2FLIGHT INSTRUMENTSBearing Pointers and Information WindowsPressing the PFD Softkey provides access to the BRG1and BRG2 Softkeys. The BRG1 pointer is a single linepointer. The BRG2 pointer is a double line pointer. Pressthe BRG1 or BRG2 Softkey to cycle through selectingNAV1/2, GPS, or ADF for display using the correspondingpointer.DMEInformationWindowBearing 1PointerBearing 2PointerCDIDistance toBearing SourcePointer BearingIcon SourceFigure 2-27 BRG2 Information WindowWaypointIdentifierDME (optional)To display the DME Information Window, press thePFD Softkey followed by the DME Softkey.Navigation SourceFigure 2-28 DME Information WindowBearing 1InformationWindowBearing 2InformationWindowFigure 2-25 HSI with Bearing InformationWaypointIdentifierDistance toBearing SourceBearing PointerSource IconFigure 2-26 BRG1 Information WindowChange CDI navigation sources:1) Press the CDI Softkey to change from GPS toVOR1/LOC1.2) Press the CDI Softkey again to change fromVOR1/LOC1 to VOR2/LOC2.3) Press the CDI Softkey a third time to return toGPS.When using GPS as the navigation source, the followingmay appear:• LOI - GPS position integrity is inadequate for thecurrent procedure being flown. If GPS is being usedas primary navigation, and LOI is annunciated, othermeans of primary navigation will be required, suchas VHF. LOI is also displayed during GPS positioninitialization.• WARN – GPS detects a position error.190-00384-07 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III2-11