G1000 Reference Guide - SkyHoppers

SECTION 8 – FLIGHT PLANNING8.14 EDIT A STORED FLIGHT PLAN1) Press the FPL Key and turn the small FMS Knobto display the Flight Plan Catalog Page.2) Press the FMS Knob to activate the cursor.3) Turn the large FMS Knob to highlight the desiredflight plan and press the ENT Key.4) Turn the large FMS Knob to place the cursor inthe desired locations for entering changes.5) Turn the FMS Knobs to make the desired changes,then press the ENT Key.6) Press the FMS Knob to return to the Flight PlanCatalog Page.8.15 DELETE A WAYPOINT FROM THEFLIGHT PLAN1) With either the Active or Stored Flight Plandisplayed, press the FMS Knob to activate thecursor.2) Turn the large FMS Knob to select the waypointto be deleted.3) Press the CLR Key to display a ‘REMOVE (WptName)’ confirmation window.8.16 INVERT AND ACTIVATE A STOREDFLIGHT PLAN1) From the Flight Plan Catalog Page, press the FMSKnob to activate the cursor.2) Turn the large FMS Knob to highlight the desiredflight plan.3) Press the INVERT Softkey. ‘Invert and activatestored flight plan?’ will be displayed.4) With ‘OK’ highlighted, press the ENT Key. Theselected flight plan is now inverted and activated.The original flight plan remains intact in its flightplan catalog storage location.8.17 COPY A FLIGHT PLAN1) From the Flight Plan Catalog press the FMS Knobto activate the cursor2) Turn the large FMS Knob to highlight the flightplan to be copied.3) Press the COPY Softkey.4) A ‘Copy to flight plan #?’ confirmation window isdisplayed. With ‘OK’ highlighted, press the ENTKey to copy the flight plan. To cancel, turn thelarge FMS Knob to highlight ‘CANCEL’ and pressthe ENT Key.Figure 8-20 Remove Waypoint Confirmation4) With ‘OK’ highlighted, press the ENT Key toremove the waypoint. To cancel the deleterequest, turn the large FMS Knob to highlight‘CANCEL’ and press the ENT Key.5) Once all changes have been made, press the FMSKnob to remove the cursor.190-00384-07 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III8-7