G1000 Reference Guide - SkyHoppers

SECTION 12 – ANNUNCIATIONS& ALERTSGDL 69A Message AdvisoriesMessageGDL69 CONFIG – GDL 69configuration error. Config servicereq’d.GDL69 FAIL – GDL 69 has failed.MANIFEST – GDL software mismatch.Communication halted.CommentsGDL 69 configuration settings do not match those of backup configurationmemory. The G1000 system should be serviced.A failure has been detected in the GDL 69. The receiver is unavailable. TheG1000 system should be servicedThe GDL 69 has incorrect software installed. The G1000 system should beserviced.GDC 74A Message AdvisoriesMessageMANIFEST – GDC1 softwaremismatch. Communication halted.CommentsThe GDC 74A has incorrect software installed. The G1000 system should beserviced.Miscellaneous Message AdvisoriesMessageFPL WPT LOCK – Flight plan waypointis locked.FPL WPT MOVE – Flight planwaypoint moved.TIMER EXPIRD – Timer has expired.DB CHANGE – Database changed.Verify user modified procedures.CommentsUpon power-up, the G1000 system detects that a stored flight plan waypoint islocked. This occurs when an aviation database update eliminates an obsoletewaypoint. The flight plan cannot find the specified waypoint and flags thismessage. This can also occur with user waypoints in a flight plan that is deleted.Remove the waypoint from the flight plan if it no longer exists in any database,ORupdate the waypoint name/identifier to reflect the new information.The system has detected that a waypoint coordinate has changed due to a newaviation database update. Verify that stored flight plans contain correct waypointlocations.The system notifies the pilot that the timer has expired.This occurs when a stored flight plan contains procedures that have beenmanually edited. This alert is issued only after an aviation database update.Verify that the user-modified procedures in stored flight plans are correct and upto date.12-20Garmin G1000 Cockpit Reference Guide for the Cessna Nav III190-00384-07 Rev. A