G1000 Reference Guide - SkyHoppers

SECTION 8 – FLIGHT PLANNING8.4 ACTIVATE A FLIGHT PLAN LEG1) From the Active Flight Plan Page, press the FMSKnob to activate the cursor and turn the largeFMS Knob to highlight the desired destinationwaypoint.2) Press the ACT LEG Softkey (using MFD only).OR3) Press the MENU Key, select the ‘Activate Leg’option from the page menu and press the ENTKey. This step must be used when activating aleg from the PFD.4) With ‘Activate’ highlighted, press the ENT Key.Figure 8-7 Delete Flight Plan Confirmation8.6 INVERT ACTIVE FLIGHT PLAN1) From the Active Flight Plan Page, press the MENUKey to display the Page Menu.2) Turn the large FMS Knob to highlight ‘InvertFlight Plan’ and press the ENT Key. The originalflight plan remains intact in its flight plan catalogstorage location.3) With ‘OK’ highlighted, press the ENT Key to invertthe flight plan.Figure 8-5 Activate Flight Plan Leg Confirmation8.5 STOP NAVIGATING A FLIGHT PLAN1) Press the FPL Key to display the Active Flight PlanPage.2) Press the MENU Key to display the Page Menuwindow.Figure 8-8 Invert Flight PlanFigure 8-9 Invert Flight Plan ConfirmationFigure 8-6 Delete Flight Plan3) Turn the large FMS Knob to highlight ‘DeleteFlight Plan’ and press the ENT Key. With ‘OK’highlighted, press the ENT Key to deactivate theflight plan. This will not delete the stored flightplan, only the active flight plan.190-00384-07 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III8-3