city of sault ste. marie special exceptions by-law 2005-151 office ...

______________________________________________________________________________________107 (865) MANUFACTURE OF LIGHT METAL PRODUCTS ONLY-DD1 SEAMLESSCYLINDER INTERNATIONAL-1669 TRUNK ROADNotwithstanding the provisions of By-law 2005-150, the lands described as part of Lot 55, Registrar‟sCompiled Plan No. H-714, now being Part 1, Plan 1.R. 2834, Civic No. 1669 Trunk Road and are shownoutlined and marked “subject property” on the Schedule No. 869 hereto, may be used to permit themanufacture of light metal products only, subject to the following special provisions:1. The building setback requirement along the westerly property line is reduced to 2.9m; and2. The building setback requirement along the southerly property line is reduced to 3m.Schedule No. 869 to By-law 88-288______________________________________________________________________________________108 (875) PARKING PROVISIONS-473 QUEEN STREET EAST-BLOCK ANotwithstanding the provisions of By-law 2005-150, on the lands described as Lots 1 to 15, both inclusive,in the Bingham Subdivision, Registered Plan No. 14736, being Civic No. 473 Queen Street East and shownas Block A on Schedule 879 hereto the following special provisions shall apply:1. The minimum parking stall width for each parking space is reduced to 2.59m2. The extended 5.49m laneway be used to calculate the aisle-way requirements as stated in Section5.4.4 of By-law 2005-150.Schedule No. 879 to By-law 89-64______________________________________________________________________________________58