Alibre Design

Chapter 5 - 3D Sketching‣ To control elevation using Elevation Dialog:1. Select the Elevation tool from the sketching toolbar; or from the 3DSketch menu, select Elevation. The Elevation dialog box appears.2. Enter the desired elevation in the dialog box. This dialog can remain open and inuse during other commands.3. Click the X in the upper corner of the dialog box to close when finished.5.2 Entering and Exiting 3D Sketch Mode5.2.1 Entering 3D Sketch ModeYou must enter 3D sketch mode before you can begin sketching.‣ To enter 3D sketch mode:Select the Activate 3D Sketch tool from the Sketching toolbar.OrFrom the 3D Sketch menu, select Activate 3D Sketch.The activate 3D Sketch tool on the Sketching toolbar will always appear in the activestate while in 3D sketch mode.5.2.2 Exiting 3D Sketch ModeThe same methods used to enter 3D sketch mode can be used to exit 3D sketch mode.126