Alibre Design

Chapter 7 - Feature Creation7.8.1 Constant Radius FilletsConstant radius fillets create a rounded face of constant radius on an edge.‣ To create a constant radius fillet:1. Select the Fillet tool from the Part Modeling toolbar; or from the Featuremenu select Fillet; or right-click and select Add Fillet from the pop-up menu. TheFillet Edges dialog box appears.2. Select Constant Radius as the Fillet Type.3. Select the edge(s) or face(s) to be rounded. Selecting a face will subsequentlyselect all the edges associated with that face.4. Unselect the Tangent Propagate option if necessary. The Tangent Propagateoption creates a fillet on the selected edge as well as any other edges that form apath in which a tangent condition can be resolved.5. Specify the Radius.182Tangent Propagate On Tangent Propagate Off