Alibre Design

Chapter 12 - Drawings‣ To show or hide hidden or tangent edge lines in a view:Right-click a view in the Drawing Explorer, or right-click a view in the work area andselect one or both of the following: Show Hidden Lines, or Show Tangent Edges.A check mark displayed next to the option indicates the item is currently beingdisplayed.12.3.11 Centerlines and CentermarksThe following apply to centermarks and centerlines in 2D drawings:• Displayed by default for holes in 2D drawings.• Can be modified globally or on an individual basis.• Dimensions can be placed between centermarks/centerlines and any otherapplicable item in a view.• Can be individually deleted, edited, or placed on a different layer.• Can be inserted on a per view basis.• Can be inserted individually for projected circular or cylindrical geometry.‣ To turn off automatic centermark and centerline display:1. From the File menu, select Properties. The Drawing Properties dialog boxappears.2. Click the Detailing tab.3. Under View Creation Options, uncheck Centerlines and/or Centermarks.4. Click Apply and Close.‣ To modify global centermark and centerline properties:1. From the File menu, select Properties. The Drawing Properties dialog boxappears.2. Click the Detailing tab.3. Under Centerlines, modify the Centermark Style, Short Dash, Extension, andGap as needed.349