Alibre Design

Chapter 11 - Assembly Design‣ To check for interferences:1. Select the Check for Interferences tool from the Inspection toolbar; or fromthe Tools menu select Check for Interferences. The Interferences dialog boxappears.2. Select Global or User Specified Groups. The Global option checks forinterferences considering all parts of the assembly. The User Specified Groupsoption checks only the parts you select.3. If you selected User Specified Groups, you must select at least one part inGroup 1. You can then choose to check for interferences between the selectedGroup 1 part(s) against:• Group 1: checks for interferences within the selected Group 1 parts(requires at least two selections)• Group 2: checks for interferences between Group 1 parts and partsselected in Group 2• All Other Items: checks for interferences between Group 1 parts andall other parts in the assembly4. Click the Check button. The number of interferences detected is listed in theInterference found box. Each interference will also be listed individuallyspecifying which parts are interfering as well as the interfering volume.5. To further analyze interferences, select interference Display Options:312