Alibre Design

Chapter 12 - Drawings‣ To change the hatch pattern for all parts in the section view:1. Right-click the section view in the work area and select Change Cross Hatch fromthe pop-up menu; or right-click the section view in the Drawing Explorer and selectChange Cross Hatch from the pop-up menu.The Hatch Properties dialog box appears.2. Select a new cross hatch pattern from the Pattern pull down menu.3. Specify the cross hatch Scale.4. Specify the cross hatch Angle.5. If desired, you can also modify the color, line weight, and offset distance for thehatch pattern.6. Click OK to apply the new cross hatch pattern.Note: You can also access the cross hatch settings from the Drawing Propertiesdialog box. From the File menu, select Properties and then select the Detailingtab in the dialog box.‣ To change the hatch pattern for individual parts in a section view:1. In the Drawing Explorer, expand the assembly under the section view to reveal theindividual parts displayed in the section.2. Right-click the desired part and choose Change Cross Hatch from the pop-upmenu.The Hatch Properties dialog box appears.3. Modify the hatch pattern properties as desired.4. Click OK to apply the new cross hatch pattern to the selected part.377