Alibre Design

Chapter 11 - Assembly Design‣ To unhide the part:Right-click the part in the Design Explorer and select Hide again.11.3.11 Changing a Part's DisplayYou can control the display of an individual part.‣ To change a part's display:Right-click a part in the Design Explorer and select Wireframe, Shaded, Shaded &Visible Edges, or Shaded & All Edges from the pop-up menu. The part displaychange is reflected in the work area.11.3.12 Applying Color Properties to a PartYou can apply different color properties to each part in an assembly.‣ To apply color properties to a part:1. Select a part either in the Design Explorer or the work area.2. Select the Color Properties tool from the Part Modeling toolbar; or right-clickin the work area and select Color Properties from the pop-up menu; or from theEdit menu select Color Properties. The Color Properties dialogbox appears.3. Select a color and set the Reflectivity and Opacity levels as necessary.4. Click OK to apply the properties.Note: You can apply the same color properties to the entire assembly. Select the toplevelassembly in the Design Explorer, or from the Edit menu select Select All. Followsteps 1-4 above to apply the color properties.11.3.13 Checking Part Physical PropertiesYou can check physical part properties on an individual part basis or the assemblybasis.301