Alibre Design

Chapter 12 - Drawings6. From the Arrow pull-down menu, select the type of arrow to use with the leader.7. In the work area, select the face, edge, or view to attach the annotation. If aleader is used, two clicks are required.8. Continue to click to populate a series of datums.9. Click Apply and Close when finished.Datums can be resized and repositioned by clicking the text and dragging. This willchange the length of the leader, as well as reposition the datum box. Datums can alsobe moved to another location by clicking the arrow, as opposed to the text.12.7.4 Datum TargetsIn part or assembly workspaces, you can attach datum target annotations to faces ofmodels (but not to vertices or edges). In drawing workspaces, you can place datumannotations at any location.‣ To insert a datum target:1. In any type of workspace, from the Insert menu select Annotation > DatumTarget. In a drawing workspace, select the Datum Target tool from theDetailing toolbar. The Datum Target Annotation dialog box appears.394