Alibre Design

Chapter 11 - Assembly DesignYou must be currently viewing an existing exploded view that has at least one partmoved from its default location for any of the above options to be available.Once you have the Exploded View Step Editor open, you can click on each step, and thepart associated with that step will be highlighted in the work area. You can name astep, add a description, or change the sequence of the steps.‣ To modify a step:1. Click on the step you wish to edit.2. In the Name field, type a name that you want to use to refer to that step.3. In the Description field, enter a description of what that step does.4. Using the movement buttons on the right, move the step up or down in thesequence, or move it to the first or the last position in the sequence.5. Choose Apply, then Close.11.7.5 Deleting an Exploded View‣ To delete an exploded view:1. Make sure you are not currently editing any Exploded views.2. In the Design Explorer, right-click the Exploded view you want to delete and selectDelete from the pop-up menu; or select the Exploded view in the Design Explorer,and press Delete on the keyboard.11.7.6 Duplicating an Exploded ViewYou can create a copy of an existing exploded view.‣ To duplicate an existing exploded view:1. Make sure you are not currently editing any Exploded views.2. In the Design Explorer, right-click the Exploded view you want to duplicate andselect Duplicate from the pop-up menu; or select the Exploded view in the DesignExplorer, and from the Insert menu, select Duplicate Exploded View.320