Alibre Design

Chapter 12 - Drawings7. Repeat steps 2-6 on the Feature Relative tab if you want to specify a stackedfeature control frame. This allows you to see a different symbol for each row. Ifyou want a composite tolerance instead (one symbol shared across rows), checkthe Composite Tolerance checkbox.8. Select the Projected Tolerance option if required and specify the Height of the projected tolerance zone.9. Select the Standard that you want to use for the tolerance symbol. Alibre Designsupports ANSI Y14.5 M-1982 and 1994. The preview shows the symbol for theselected standard.10. Select the Between Points option to call out a tolerance between two points.Enter labels for the two points.11. Select the Show option to include a leader, the Bent option if desired, and selectan Arrow type.12. Select Smart Anchor if necessary.13. Click in the Face or Point field.14. In the work area, select a face, edge, or location to place the annotation.15. Click OK.12.7.6 Surface Finish SymbolIn drawing, part, or assembly workspaces you can specify the surface texture of a faceby using a Surface Finish Symbol.‣ To create a surface finish symbol:1. In any type of workspace, from the Insert menu select Annotation > SurfaceFinish. In a drawing workspace, select the Surface Finish tool from theDetailing toolbar. The Surface Finish dialog box appears.2. From the Symbol pull-down menu, select the machining method for the surfacefinish.399