Alibre Design

Chapter 8 - Sheet Metal Feature Creation and Part ParametersFeatures > Boss . . . create extruded, revolved, sweep, or loft boss featuresFeatures > Cut . . . create extruded, revolved, sweep, or loft cut featuresFeatures > Thin Wall Boss . . . create a thin wall extruded, revolved, or sweep bossfeatureFeatures > Thin Wall Cut . . . create a thin wall extruded, revolved, or sweep cutfeatureFeatures > Fillet . . . create a fillet featureFeatures > Draft . . . create a draft featureMirror . . . mirror a feature about an edge or axisPattern > Linear . . . create copies of a feature in a linear patternPattern > Circular . . . create copies of a feature in a circular patternSave Catalog Feature ... save a feature to the repository for use in other models8.2 Sheet Metal Part ParametersSheet metal parts have parameters that govern the way the part can be designed. Theparameters are used as defaults in many sheet metal features. This allows a flatpattern to be resolved.1. From the File Menu, select Properties. The Design Properties dialog box appears.207