Alibre Design

Chapter 4 - Sketching2. Select the arc AND center node by dragging a selection rectangle around theentities.3. Hold the Shift key, click and hold the mouse button, and drag the circular arc.4. Release the mouse button.4.3.4 RectanglesYou can sketch two different rectangle types: 1) Rectangle by Two Corners; 2)Rectangle by Three Corners.‣ To sketch a rectangle using Two Corners:1. Select the Rectangle by Two Corners tool from the Sketching toolbar; orfrom the Sketch menu select Figures > Rectangle > Two Corners.2. Click to place one corner of the rectangle.3. Move the mouse pointer to sketch the rectangle.4. Click a second time to locate the opposite corner of the rectangle.‣ To sketch a rectangle using Three Corners:1. Select the Rectangle by Three Corners tool from the Sketching toolbar; orfrom the Sketch menu select Figures > Rectangle > Three Corners.2. Click to place one corner of the rectangle.3. Move the mouse pointer and click a second time to locate the other corner on thesame end of the rectangle.4. Move the mouse pointer to adjust the rectangle length.5. Click a third time to place the end of the rectangle.58