Alibre Design

Chapter 6 - Reference Geometry5. Click OK to create the plane.6.1.3 Angled PlaneYou can create a new plane through an edge or axis at an angle to an existingreference plane or planar face.‣ To create an angled plane:1. Select the Insert Plane tool from the Inspection toolbar; or from the Insertmenu, select Plane; or right-click in the work area and select Insert Plane fromthe pop-up menu. The Insert Plane dialog box appears.2. Select an existing edge or axis.Select an existing reference plane or planar face. A preview of the new planeis displayed.3. Enter the Angle value.4. If necessary, select Reverse to create the plane in the opposite direction.5. Click OK to create the plane.142