Alibre Design

Chapter 12 - Drawings3. In the View Selections area select the views that you want to insert into thedrawing. The default views are Front, Top, and Right. To add or remove a view,click the view's corresponding button.4. In the case of assemblies, if any exploded views were created in the assemblyworkspace, you can also select an exploded view from the Exploded Views list.5. Check the Include design dimensions box if you want to display the drivingdimensions from the model.6. The default value for the view Scale is automatically computed by Alibre Design sothat the new views fit cleanly onto the sheet. As an alternative, you may overridethis value by entering an explicit value or by choosing to use the Sheet scale.7. Click OK to create the views. Previews of the selected views are displayed in thework area. Note that the cursor is essentially tied to the front view. As you movethe cursor, the views will all move together.8. Move the cursor to dynamically re-position the front view to the correct locationwithin the drawing sheet.9. Click to place the front view. The corresponding views are also placed.Note the dimensions that were used to create the part are displayedautomatically in the corresponding view.337