Alibre Design

Chapter 19 - Alibre Motion‣ To set General options:1. Check Show all warning, information and confirmation dialogs to see pop-updialogs with messages and warnings while working in Alibre Motion.2. Check Show Simulation Messages to see messages concerning the actions andstatus of the Simulator in the Motion Status Window.3. Check Save Simulation Data in Assembly File if you want to save your simulationdata with the assembly. If you do NOT want your simulation information saved,un-check the box.Note: If this box is not checked, any Simulation setup data, actuators, springs,dampers and feedback elements will not be saved, and will be lost when you closethe Assembly workspace.When you have finished setting all of your desired options:1. Check Make these the default settings to save these settings as the default forall new Simulations generated from that point on.2. Click OK to apply your changes and exit the dialog, or click Cancel to abandonyour changes and exit the dialog.19.3.4 Playback DeckThis section of the Motion Explorer is used to control the starting and playback ofSimulations. From here you also control the X-Y Plots dialog, the Interferences dialog,the Video Generation (AVI) dialog, and the Settings / Options dialog.Note: The Playback deck is only enabled when you are in Simulation Mode. SelectSimulation Mode from the Motion main menu.531