Alibre Design

Chapter 13 - Bills of Material3. The Minimum and Maximum values are specific to the table being split. TheMinimum value represents the combined width of the header row and the widestrow in the table. The Maximum value represents the combined width of theheader row and all the rows in the table except for the last row.4. In the Split At field, specify a split value. This value must fall between theMinimum and Maximum view height values.5. Click OK. The view is split into multiple views.You can move the views independently on the sheet. You can also move individualviews onto a different sheet if necessary. However, if you delete or hide one view, therest of the views will be deleted or hidden as well. If you add a row to the BOM after ishas been split, the row will be added to the last BOM view.To restore the view back to its original configuration, enter a Split At value outside theMinimum - Maximum range.13.3.10 Adding Callout BalloonsAfter you have linked a BOM with a drawing or inserted a BOM view into a drawing, youcan add callout balloons to drawing views.‣ To add callout balloons:1. Select the Callout tool from the Detailing toolbar; or from the Insert menu,select Annotation > Callout.416