Alibre Design

Chapter 11 - Assembly DesignThe part being edited is listed in blue in the Design Explorer and all theassociated reference geometry, sketches, and features can be accessed.2. Edit the part sketches or features just like you would in a part workspace. You canalso add new features if required.3. After making the necessary changes, return to assembly edit mode by rightclickingthe part being edited in the Design Explorer and select Edit RootAssembly; or right-click the top-level assembly in the Design Explorer and selectEdit Part/Subassembly.‣ To edit a part in an individual workspace:1. While holding the Shift key, right-click the part you want to edit in the DesignExplorer and select Edit Part/Subassembly.The part opens in a separate workspace.2. Make any necessary changes to the part. The changes will be applied to theassembly automatically.3. When finished editing, close the part workspace. You will be prompted to save thepart if changes have been made. Save the part if you want to save the changes.You are returned to the assembly workspace and can continue working.328