MEP-Technical Manual CDN 0408.qxd - Hambro

8.2 MD2000 ® SERIES
TYPICAL DETAILS
SECTION NO. DESCRIPTION PAGE
1 Standard Shoe
2 Bolted Joist at Steel Column (Flange / Web)
3 Bolted Joist at Steel Beam
4 Joist Bearing on Masonry or Concrete Wall
5 Joists Bearing on Masonry or Concrete Wall
6 Joist Bearing on Concrete Wall With Insulated Form
7 Joists Bearing on Concrete Wall With Insulated Form
8 Joist Bearing on Steel Beam
9 Joists Bearing on Steel Beam
10 Joist Bearing on Steel Stud Wall
11 Joists Bearing on Steel Stud Wall
12 Joist Bearing on a Wood Stud
13 Joists Bearing on Wood Stud Wall
14 Expansion Joint at Intermediate Floors (at Masonry Wall)
15 Expansion Joint at Roof (at Masonry Wall)
16 Expansion Joint at Floors (at Steel Beam)
17 Expansion Joint at Roof (at Steel Beam)
18 Minimum Clearance for Opening and Hole in the Slab
19 Joist Parallel to Expansion Joint
20 Joist Parallel to a Masonry Wall or Concrete Wall
21 Joist Parallel to a Concrete Wall with Insulated Form
22 Joist Parallel to a Steel Beam
23 Joist Parallel to a Steel Stud Wall
24 Joist Parallel to a Wood Wall
.............................................. 14
.............................................. 15
.............................................. 16
.............................................. 17
.............................................. 18
.............................................. 19
25 Thicker Slab
}
26 Header Support .............................................. 20
27 Cantilevered Balcony (Joist Perpendicular to Balcony)
28 Cantilevered Balcony (Shallow Joist Parallel to Balcony)
29 Cantilevered Balcony (Joist Parallel to Balcony)
.............................................. 21
30 Maximum Duct Openings ............................................................................................................... 22
}
}
}
}
}
}
}
13