Carriers

Technical Data — UNIFLEX Series
Type 0665
Divider system
for design 0665.030/035/040/045
in accordance with section in schematic
illustration
The divider system can be planned by you or by our engineers on the
basis of the information you supply about the configuration of the cable
carrier.
As standard, the divider system is fitted on every 2nd chain cross
section!
Divider system TS 0
without height subdivision
s T = 3 mm
a T min = 6.5 mm*
a x min = 13 mm
* a T min = 12.5 mm with Design 035 and 045
Please state the number of
dividers/cross section n T when ordering.
44
KR
a
s aTL
T
x
a TR
B i
The dividers can slide along the chain cross section!
Sample order:
Divider system TS 0 / n T 4
Divider system TS 1
VD 1 VD 2 VD 4 VD 23 VD 43 VD 45
with continuous height subdivision
Height subdivision: Al-Profile 11 x 4 mm
s T = 3 mm
a T min = 6.5 mm*
20
20
27 13
6
34
13 10 13
6
17
13
6
24
6
KR
4
2
1
3
5
14
28
a T max = 40 mm
a x min = 13 mm
n T min = 2
a TL
a x
s T
B i
a TR
Position of the
sub-division(s)
in the divider
* a T min = 12.5 mm with Design 035 and 045
Please state the type of height
subdivisions and the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 1 - VD 4 / n T 4
Technically recommended variants: VD 1, VD 2 and VD 3
The dividers can slide along the chain cross section!
UNIFLEX Subject to technical changes! 3.133