Carriers

Technical Data — M Series
Type ME/MK 1250
Divider systems
for Stay variant “RE and RD“
Divider system TS 4
with continuous height subdivision
Height subdivision:
Plastic-Profile 27 x 8 mm
Design 2
32
Design 1
KR
32
a x2
B i
s T
s T = 4 mm
a x min = 15 mm
Half-dividers can slide along the chain cross-section.
At least 2 half-dividers with clamp grips on both
sides (Design 1) should be fitted in the lower
chamber near to the chain band.
Please state the type and the number of
dividers/cross section when ordering.
Sample order: Divider system TS 4
Please enclose a sketch
3.532 Subject to technical changes! ME/MK