Carriers

Technical Data — M Series
Type MT 0950
Divider systems
for Stay variant “RDD“
The divider system can be planned by you or by our engineers on the
basis of the information you supply about the configuration of the cable
carrier.
As standard, the divider system is fitted on every frame stay!
(with stay assembly on every 2nd chain link)
Divider system TS 0
without height subdivision
The dividers are fixed in the chain cross-section (16 mm- sections).
s T = 6 mm
a T min = 22.5 mm
a x min = 16 mm
n min = 2 mm
54.5
For version A dividers with s T = 4 mm
are also available.
sT
KR
Please state the type of height
subdivisions and the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 0 / n T 3
a TL
a x1
B i
a TR
Divider system TS 1
without continous height subdivision
Height subdivision: Al-Profile 11 x 4 mm
Technically recommended variants: VD 1, VD 4 und VD 5
The dividers can slide along the chain cross section!
VD 1 VD 4 VD 5 VD 45 VD 145
27
16
16
16
4 6 2
1
3
5
7
a TL a x1 Bi '
a TR
s
Position of the
T
B i
subdivision(s)
in the divider
23.5
34.5
38
12.5
18
12.5
7
7
12.5
KR
22
s T = 6 mm
a T min = 22.5 mm
a T max = 22.5 mm
a x min = 16 mm
a x max = 48 mm
a x grid = 16 mm
n T = 2
Please state the type of height subdivisions and the number of
dividers/cross section n T when ordering.
Sample order: Divider system TS 1– VD 45/n T 5
For Version A dividers with s T = 4 mm
are also available.
3.718 Subject to technical changes! MT