Carriers

Technical Data — M Series
Type ME/MK 1250
Divider systems
for Stay variant “RE and RD“
The divider system can be planned by
you or by our engineers on the basis of
the information you supply about the
configuration of the cable carrier.
As standard the stay system is fitted to
every frame stay (with stay assembly on
every 2nd chain link).
Version A
Notch in connecting
profile to the
inside
(Standard)
The dividers can
slide along the
section.
Version B
Notch in connecting
profile to the
outside
The dividers are
fixed in the section
(a x -grid 16 mm)
Divider system TS 0
without height subdivision
Dividers can slide along the cross-section (Version A) or are fixed
(Version B). For divider version B please state fitting intervals
a T and a x !
Version A Version B
s T 8 mm 8 mm
a T min 5 mm 19.5 mm
a x min 14.5 mm 16 mm
a x grid continuous 16 mm
72
Please state the type and the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 0-A / n T 4
s T
a TL a x1
a TR
B i
KR
VR 1 VR 4 VR 5 VR 45 VR 145
34 34
18
50
50
18
18
28
18
18 12 12 18
6
4
2
1
3
5
7
32
KR
Divider system TS 1
with continuous height subdivision
Height subdivision: Al-Profile 11 x 4 mm
Technically recommended variants: VD 1, VD 4, und VD 5
Dividers can slide along the cross-section (Version A) or are fixed
(Version B). For divider version B please state fitting intervals
a T and a x !
s T
a TL a x1
a x2
a TR
B i
Position of the
subdivision(s)
in the divider
Version A Version B
s T 8 mm 8 mm
a T min 5 mm 19.5 mm
a x min 14.5 mm 16 mm
a x grid continuous 16 mm
n T min 2 2
Please state the type of height subdivisions and the number of
dividers/cross section n T when ordering.
Sample order: Divider system TS 1– VD 45/n T 5
3.530 Subject to technical changes! MK