Carriers

Technical Data — M Series
Type MC 0650
Divider systems
for stay variant “RS“
Divider system TS 3
with height subdivision
Plastic Partitions
Technically recommended variants: VR 0, VR 1, VR 2, VR 23
and VR 3
Dividers fixed by height subdivision, the grids can slide along
the chain cross section!
VR 0
VR 1 VR 2 VR 145 VR 23
38
17
17
10
24
3
3 10 10
10
10 10
KR
4
2
1
3
5
14
a TL
B i
a x1 a x2
s T
a TR
Twin Divider
Position of the
sub-division(s)
in the divider
Assembly of
Twin Divider
s T = 8 mm
a T min = 4 mm
a x min = 16 mm (with height subdivision)
a x grid = see a x -table
The twin divider can be moved, suitable
for later assembly/fitting.
s T = 3 mm
Sample order:
Divider system TS 3
K(cavity) 1 - VR 0 / 23 mm
K 2 - VR 1 / 48 mm
K 3 - VR 23 / 58 mm
K 4 - VR 1 / 33 mm
ax
a x mm (Centre-to-centre distance of dividers)
16 18 23 28 32 33 38 43 48 58 64 68 78 80 88
96 112 128 144 160 176 192 208
When using partitions with a x > 112 mm, a twin divider should be
used to provide an additional central support.
4.0
Please indicate the cavities (from left to right),
the relevant subdivision variant and the assembly
spacing a T and a x when ordering.
3.410 Subject to technical changes! MC