Carriers

Technical Data - QUANTUM-Series
Type Q080
Cross-sections
in accordance with section in schematic
illustration
Stay variant “RS“
Frame stay – standard design
Aluminium profile bars detachable on the
inside and the outside
Not a bolted connection!
Profile bars can be released by turning
them through 90°.
Stay configuration:
Bi
from 50 - 600 mm in sections of 1 mm
58
80
88
1/2 Arrangement – Standard
Stays on every 8th pitch
division
B i
Bk
BEF'
25
KR
1/1 Arrangement
Stays on every 4th pitch
division. Please specify when
placing order.
Glide shoes can be attached
for long travel lengths
Calculation of chain width:
B k = B i + 72 mm
Calculation of chain width
over connecting piece:
B k = B EF = B i + 72 mm
Calculation of chain width with
glide shoes:
B EF ’ = B i + 79.5 mm
Calculation Example:
Inside width B i = 300 mm
Chain width B k = 372 mm
Intrinsic chain weight q k = 2.0 kg/m
Intrinsic chain weight qk in kg/m
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
100
Chain width Bk in mm
200
300 400 500 600 700
Reference weight = Intrinsic chain weight qk = 2.1 kg/m (in accordance with load diagrams)
Calculation Example
Intrinsic chain weight depending on chain width B k
Divider system for “RS“
without height subdivision
Movable dividers can be used to separate
the cables and hoses from one
another.
As standard, the divider system is fitted
on every stay cross-section (with stay
assembly on every 8th pitch division).
s T = 4 mm
a T min = 11 mm
a x min = 14 mm
58
s T
a TL a x
a TR
B i
Please state the number of dividers/cross section n T when ordering.
KR
4.14 Subject to technical changes! QUANTUM