Carriers

Technical Data — K Series
Type KE 0650
Fixed point connection
Connection dimensions
Connectors made of plastic
H
Optionally with C-Profile, slit width
11-12 mm. Suitable for all commercial
saddle-type clamps with small base and
KABELSCHLEPP SLZ Strain Relief
Devices (cf. System Components.).
7.5
H
L k
l 1 = 95 L k
l 1 = 95
7.5
55
C-Profile
21.5
Bi + 14
BEF =Bi + 35.5
6.5 6.5
C-Profile
21.5
Bi + 14
BEF =Bi + 35.5
14
95 40 10
142.5
14
95 40
142.5
10
Connection FA (Standard)
Connection FI
With connection surface > l1
distancing pieces are required.
Ordering Key for the connection:
Driver connection
X.X
Connection point
F - Fixed point
M- Driver
L k
7.5
H
l 1 = 95 L k
l 1 = 95
7.5
55
H
Connection type
A- Threaded joint
to the outside (Standard)
I - Threaded joint
to the inside (towards KR)
The connection variants at the fixed point
and at the driver can be combined and
subsequently changed if required.
Please state the desired connection
variant when ordering.
Example: FA/MA or FA/MI
14
6.5
C-Profile
95 40
142.5
Connection MA (Standard)
21.5
Bi + 14
BEF =Bi + 35.5
10
14
6.5
C-Profile
21.5
Bi + 14
BEF =Bi + 35.5
95 40 10
142.5
Connection MI
With connection surface > l1
distancing pieces are required.
Ordering Key for cable carrier:
KE 0650.140 - 115 - 2600
Example
Cable carrier type KE 0650 with plastic insert stay,
inside width B i 140 mm, with bend radius KR 115 mm and
chain length L k = 2600 mm
Type
Inside width B i in mm
Bend radius KR in mm
Chain length L k in mm (without connection)
3.306 Subject to technical changes! KE